Hope you guys in in the SE enjoyed your white Christmas.
I spent Xmas afternoon shoveling our record December snow fall off my roof
Need to borrow some snowshoes to hike into the marina to inspect Happy Place.
H:)ppy Place
78 Chrysler 22
You can go to a Zen Master or you can go Sailing, either way you end up in about the same place..... a Happy Place
Loving our southeastern snowfall so far. Had 2.5" last night, awoke to a solid 6" and it's still coming down
Tomorrow's going to be a little cold (high in the low to mid 20s) but is supposed to blow somewhere between 15-20 gusting 30 and steady 25 gusting 40. Windward will be sailing, barring unforeseen hardware issues.
Either tonight or tomorrow night will be on board. I'm leaning toward anchoring out, but every now and then I'm a lazy sod and stay at the dock when the temps are in the teens.
Maby someday we could be lucky enough to spend Christmas anchored off Key West . But untill then, Jeff if you come up short of crew for the frost bite regita give me a yell. Be happy to help out.
Last edited by Jmckamey on Mon Dec 27, 2010 7:24 pm, edited 1 time in total.
Sometimes initiative and good intentions just don't stand up to the conditions at hand. Headed out to Windward around 12:30 this morning. Way slick, but 4wd handled that OK. Lots of parking available. Shoveled the cockpit and deck, then spent an hour and a half attempting to free the companionway hatch with a combination of grunting, shoving, pulling, beating, colorfully commenting, scraping and chipping with various items from the dock box and truck. The mallet did cause a number of things to yield, some of which may later respond to epoxy and clamps, but it eventually became clear that the hatch would NOT be opening last evening. Drove back home around 3:30 am.
May head back out today with a pry bar, screwdrivers, a hair dryer (no heat gun available) and a torch. Still might not get to sail, though... last night all the lines were very very frozen, and the jibsheet fairlead blocks themselves were quite securely frozen to the deck. Experience has taught that the furler is not pleased when there's this much snow and ice. Still, the New Year's Day frostbite race is looking pretty crapping, with highs in the mid 50s and a 40% chance of precip, so today's forecast of winds 20 gusting 35 is hard to pass up.
Of course, I could just play in the Bristol some, take a hike, rebuild my laptop, watch a movie and improve my spirits with some single malt spirits. Hmmm. Decisions, decisions.
Supposed to be warm enough to epoxy or gorilla glue the broken teak on Thursday or Friday. Sigh.
I can just imagine that scene at the dock as he's banging away, pieces chipping off, sailor slang in the air, and being disapointed he can't get in! Too funny
Surprised nobody called the Police and he gets put in the pokey!
Fortunately none of the episodes were filmed (I hope). It's supposed to warm up later in the week, so will give it another go then. If all else fails, I'll fire up the JetBoil and resort to boiling water. Or boiling oil, if it comes to that. Currently consoling myself with a wee dram of Balvenie 14 Carribbean Cask.
It doesn't look like today's winds got much above 20 on the lake, so at least I didn't miss really stellar breeze.
Still holed up in the den sewing interior cushions , four down, five to go. Took the dog for a walk and man was it cold. Now that we got that Christmas thing outa the way, come on spring.
what type of fabric are you using for your cushions i plan on starting mine in the next month or so. i have no cushions to start from. are you covering old cushions or starting for new foam too. thanks kevin
Using a chinelle blend fabric and covering a mix of old and new cushions as my boat was missing about a third of it's cushions when I bought it. I have eight yards of good looking fabric that I cut for the boat plus another four yards not cut and changed my mind on, then bought more that I am using. If you are interested I could sell to you (or anyone ) for $50.00 plus shipping. That's what I have in it, not to mention about 6 hours cutting time. I would be happy to mail you a sample of the fabric to look at if you like. Please feel free to PM me or call me, at 423-341-8056 for more details