C26 rigging question

Here you can discuss Chrysler Sailing across all makes of Chrysler sailboats.

Moderator: CaptainScott

Skipper Dan
Posts: 98
Joined: Sat Dec 09, 2017 11:33 am

C26 rigging question

Postby Skipper Dan » Fri Sep 13, 2019 11:37 am

I am going to redo my standing rig this winter. This boat was new to me a couple of years ago and when I set it up I just used what was there. There are some irregularities in the setup. All the chainplates are 5/16". The shackles range from 1/4" to 3/8". I would not think that a 3/8" turnbuckle would go with a 5/16" chainplate. The aft is 1/4" which goes to the 5/16" chainplate. At some time between now and winter if someone could let me know what they have and if it is stock or not. I am going to move the chainplates outboard attached to the outside of the hull and I would like to know which sizes I need. All the turnbuckles except the aft are 3/8". The three aft are 1/4".

any help would be appreciated, Thank You

Posts: 11
Joined: Tue Jun 11, 2019 6:27 am
Location: Lansing Michigan

Re: C26 rigging question

Postby Darklin » Tue Oct 01, 2019 5:25 am

I would give you the info off mine Skipper Dan, but I can assure you it is NOT stock, as it was rebuilt 15 years ago out of a salvage yard.
Best of luck in finding your information

Return to “General Chrysler Sailing Discussion”

Who is online

Users browsing this forum: No registered users and 9 guests