I'm looking for 2 of part #21 & 22 on link below.
http://www.bing.com/images/search?q=par ... ajaxhist=0
Wanted Chrysler 280 outboard mounting bracket screws
- Capt. Bondo
- Site Admin
- Posts: 713
- Joined: Thu Aug 20, 2009 8:08 am
- Location: Hudson, WI
Wanted Chrysler 280 outboard mounting bracket screws
H:)ppy Place
78 Chrysler 22
You can go to a Zen Master or you can go Sailing, either way you end up in about the same place..... a Happy Place
78 Chrysler 22
You can go to a Zen Master or you can go Sailing, either way you end up in about the same place..... a Happy Place
I have (3) Chrysler outboards that I am going to convert into two runners. One is the original long shaft 9.9 with a siezed motor, a 280 with drop damage and low hours and a 12.9 short shaft with a wobbly tiller. The siezed up 9.9 is going to get the 12.9 power head. The 12.9 will be the donor for the broken castings. I think I will have an extra set of clamp screws if you need them. It will be after Christmas before I get to it however. Since you are in Hudson, I think you may be snowed in already!
Regards,
B-
Regards,
B-
We are so blessed