mast hinge ...what type would work

Here you can discuss Chrysler Sailing across all makes of Chrysler sailboats.
Post Reply
User avatar
aerojet777
Posts: 55
Joined: Tue Apr 02, 2013 3:25 pm
Location: United States

mast hinge ...what type would work

Post by aerojet777 »

Hi All, i hope you are njoying the summer. i would like to replace the factory mast bracket with the hinged type. has anybody done this ? if so what part would work for the c26. would a Dwyer hinge work ?

also how would the mast attach to the hinge ?

thanks

:?:
Dallasbob
Site Admin
Site Admin
Posts: 168
Joined: Fri Apr 15, 2011 11:22 am
Location: Dallas, Texas

Post by Dallasbob »

I really like the system the C26 has as designed . . . I'd stick with it.

If you have to change you might consider the Kenyon K-1264. You will need to call them to see what modifications will be needed.

Try the link below . . .

http://www.rigrite.com/Spars/SparParts/Mast_hinges.html
Bob T . . .
1979 Chrysler 26 "Indecision"
Dallas, Texas / I-45 / Galveston Bay
User avatar
aerojet777
Posts: 55
Joined: Tue Apr 02, 2013 3:25 pm
Location: United States

mast hinge ...what type would work

Post by aerojet777 »

hi dallasbob, is the stock chrysler hinge easy to use or does the mast tend to slip off the hook ? i havent raised a mast on this hook before, im just wondering if it would be difficult to keep the mast on that hook while raising it. Or is it easier to install one of those hinged mast brackets so the mast doesnt fall off.
User avatar
EmergencyExit
Site Admin
Site Admin
Posts: 2956
Joined: Wed Dec 10, 2003 5:02 pm
Location: Mississippi Gulf Coast

Post by EmergencyExit »

I think Capt Scott just tapped and screwed his to the bottom of the mast shoe with no issues. Some pics from him are in this thread

http://www.chryslersailors.com/discussi ... tain+scott
Post Reply