Mast step cracked and bad fiberglass work by previous owner
Bow with rotted/rusted fiberglass rub rail step? any suggestions for new rub rail to purchase?
After cleaning the cockpit area of all cushions and dirtyness. also missing the end of the rub rail cover on the aft section port side, can i get this anywhere?
Old Lone*Star logo still partly visible. Bow may need a little bit of cleaning up where winch has been rubbing
Port side boat on trailer that it came with. look about half way back to see some "bondo" i think that was added to smooth side.
Starboard side, you can see why the rub rail needs to be replaced, again any suggestions? a tree branch fell on the bow during the winter of 2013-2014.
Top of boat, im thinking small patch if i have to but main plan is to get some nice wood and cut it out to cover this ugly patch and possibly add strength to it. Suggestions?
A closer angle of the crushed bow section from the tree branch that fell on it, last person did a terrible patch job so i will have to get rid of that somehow.
Aft section previously named fortune cove 1. Again is there somewhere i can get another rub rail cover like the one on the right side?
Ok, here is the picture that sums up pretty much all of the gel coat on the topside of the boat, spiderweb cracks everywhere. I sanded this down as much as i could last summer but didn't get far so my plan i think is to paint and fill the cracks with the paint somehow. I normally dont think i would do this but considering the boat is only worth at very best in pristine condition, less than $1000 bucks, it isn't worth it to regelcoat.
Port side, just trying to show gel coat cracks up the edge. Before it was cleaned out.
Recently replaced floor pic from last owner. also both dagger boards work he also replaced those mechanics and made them work.
Alright it only took me 9 months but pictures are up. Any and all suggestions are welcomed and wanted because this is my first major boat repair.
Thanks for everything guys.
Nick