I have a bent stanchion that needs to be replaced and I do not see any mechanical fastener holding the eye onto the post...
I haven't tried anything yet because I didn't want to break the eye.
Also any ideas on how to remove the end fitting, just before the turnbuckle, on my lifeline?
My lines have stretched and the turnbuckle is already maxed out. I need to shorten the lines and reattach the end fittings.
Thanks for the help. You guys are the best!!!!!
Zac
Stanchion Eye Removal Advice...
I ended up cutting the tube of the stanchion about 3" from the top and clamped it in my vice. Well tapping it, twisting, twisting and tapping, heating twisting and tapping, etc... none of that worked and eventually the eye just snapped. So I have to buy another one now. However if someone knows how to properly remove these bad boys please let us know.
Zac
Zac
The cast metal eyes were probably pressed in by machine. That is my guess.
The end fittings on the life lines look as though they are swaged fittings. If that is the case they are not removable. I wouldn't reuse the coated cable anyway...there is no sure way to inspect it for broken strands. I am replacing my life lines with the Suncor Quick Attach Lifeline kit. No specialized tools required, ie. swaging press etc.
The end fittings on the life lines look as though they are swaged fittings. If that is the case they are not removable. I wouldn't reuse the coated cable anyway...there is no sure way to inspect it for broken strands. I am replacing my life lines with the Suncor Quick Attach Lifeline kit. No specialized tools required, ie. swaging press etc.
Bill
- EmergencyExit
- Site Admin
- Posts: 2956
- Joined: Wed Dec 10, 2003 5:02 pm
- Location: Mississippi Gulf Coast