swing keel again

rickyd462000 · Post by **rickyd462000** » Thu Oct 22, 2009 5:36 pm

no answer from trey about swing keel brackets. does someone here have proper measurements and material suggestions? i might try to get a local shop to build them. there is a 22 on springfield mo craiglist at this time. thanks for any and all replies rick

CaptainScott · Post by **CaptainScott** » Fri Oct 23, 2009 5:27 am

Same here.
No answer from Trey.

I too will be interested however I have not dropped my keel yet.
Scott

EmergencyExit · Post by **EmergencyExit** » Fri Oct 23, 2009 5:32 am

There's used to be a measured drawing on line, but I think the site went bye-bye.

ronc98 · Post by **ronc98** » Fri Oct 23, 2009 9:59 am

if you guys can find the drawings I can get them made here. I have a complete machine shop here

lecker68 · Post by **lecker68** » Fri Oct 23, 2009 4:40 pm

I found the C-22 drawing on sailing lizards the other Chrysler site. I was going to paste here but it doesn't seem to work so here is the site

http://chryslersailing.lizards.net/
it is under specs. for the C-22
also under how to there is a description on a C-26

Bhacurly · Post by **Bhacurly** » Sun Oct 25, 2009 11:35 am

Hey Scott,

I have a set I got from Trey and couldn't get the drill pattern to line up after mounting so I didn't use them. I could bring them over in a few weeks or mail them to you...

Billy