In this document on page 333-10:
http://captainscottsailing.com/Chrysler ... Detail.pdf
There are two pieces not shown, 91C and 91D the bushing and sleeve. Does any one have a picture of those pieces? Or a diagram? Crude sketch? Anyone have a place to buy replacements for them?
C22 Rudder Pieces
- EmergencyExit
- Site Admin
- Posts: 2956
- Joined: Wed Dec 10, 2003 5:02 pm
- Location: Mississippi Gulf Coast
Looking at the diagram nothing seems to be missing. There is a bolt and sleeve around it inside the tube/cheeks where the tube meets the cheek - that's what the rudder up pull line goes around. Perhaps that's it. Or its that Rudder stop kit that's also not shown
In case you haven't seen in there are some helpful diagrams on Windward's site at
http://chryslersailing.lizards.net/sail_rudder.html
In case you haven't seen in there are some helpful diagrams on Windward's site at
http://chryslersailing.lizards.net/sail_rudder.html
- EmergencyExit
- Site Admin
- Posts: 2956
- Joined: Wed Dec 10, 2003 5:02 pm
- Location: Mississippi Gulf Coast
I checked my C26 and I thinks its about the same as a C22. Bolts is a 1/4"x2". Space in between checks is 1 1/2".mrichey wrote:I think it is the bolt and sleeve that I'm missing. No dimensions for the bolt or sleeve in the diagrams that I can see. Any one have those?
The sleeve over the bolt is whatever you come up with that fits...It really doesn't work very good anyway honestly..always a chore to pull the rudder down..