New Year's Day

Here you can discuss Chrysler Sailing across all makes of Chrysler sailboats.
Post Reply
User avatar
LeatherneckPA
Posts: 298
Joined: Tue May 11, 2010 6:45 am
Location: Williamsport, PA

New Year's Day

Post by LeatherneckPA »

It's a balmy 40 degrees here in NCPA. After I put a new wick in the kerosene heater I was bored so I finally got around to scraping the barnacles off of Believer's bottom. Well, got a start anyway. I did everything I could reach kneeling next to the trailer and I got the rudder. But somehow lying under the trailer breathing that red dust and the assorted dust of barnacles and algae just didn't seem like a very smart thing to do. I've still got a cough from the last time I cleaned the chicken house so I think I need to invest in a fitted respirator mask. And for lying under the boat I think I'll buy one with a face shield too.

I'll have to replace all the bolts and rivets holding the rudder together/in place, but that shouldn't be too difficult. 'Tis a pleasure to be working on a boat this fine day.
Iron Mike - Semper Fidelis
Jack of all trades, Master of none
1978 C-22: Believer
User avatar
Banshi
Posts: 689
Joined: Wed Jul 04, 2007 10:10 am
Location: Jacksonville, FL
Contact:

Post by Banshi »

The last boat I scraped barnacles off of was 35 + feet at the waterline and still in the water, nor was the dinghy I worked from very stable, but I was younger then...................much younger :wink:
User avatar
Alanhod
Posts: 1478
Joined: Fri May 16, 2008 4:30 pm
Location: Washington State
Contact:

Post by Alanhod »

Barnacles! Barnacles! :shock:

You want to talk about barnacles. I'll tell you about barnacles...

It was a sunny day much like any other sunny day in the Seattle area, rare and beautiful. It was the day to pull my newly acquired Chrysler C-22 out of the water and trailer it to it's new home. My friends and I have taken the mast down for the very first time, no easy task I might add as there was no OEM hook holding the base of the mast. No it was a 3 inch tall rectangular aluminum post. The mast had to be lifted strait up then lowered backward. But I digress...

As the boat lift strained to raise my beloved Honu from Puget Sound, the horror and it gives me goose bumps to this day. There was a 2 inch crust of barnacles unevenly coating the bottom of my boat! :shock: No it gets worse. You cant see it in the photo because we were all too stunned to take a photo. The entire marina and it's a big marina took in a huge gasp of air and put there hands to there faces, some covering there eyes, me crying just a single tear on the Port side of my own face.

There it was, a 6 foot tall upside down Christmas tree of barnacles and sea life hanging from the keel cable and the keel was not retracted as I thought it was. Yes a conical mass of brown writhing sea-life and indescribable fresh and foul at the same time. My quick thinking friends pulled the hanging mess as fast as they could, blooding there hands in the process. They had to move fast as the villagers were now swarming the rails to see the sight, fetching pitch forks and torches to push my lovely boat back into the water. The marina manager was on a run to stop my intrepid friends from fouling his beloved marina and dock. He was too late, the dock had inches of the writhing mass as it was trying to crawl back into the sea from which it spawn and I still could not move, transfixed by the sight and in shock.

The keel cable was now cleared of most of the filth. and they lowered my boat back in the water so I could re-board her and crank the keel up all the way as you can see in the photo's below, after the deforestation of course.

(Double Click to enlarge photo's)
Image

Image

Sadly the boat was 3 inches too tall in the keel to fit the trail and was once again lowered back into the water. While this was going on one of my friends pulled the panicked marina manager aside and slipped him an un-disclosed some of money. The marina manager told my friend to get the crazy owner (me) and his boat out of his marina in 1 week or he would and send me the bill.

Next weekend I sailed my Honu proudly out of the marina with the same marina manager glaring at me from the end of his dock as I passed. I could not hear what he said. Was he swearing at me or was he saying a prier I can not say? It took me 12 hours to motor sail about 10 miles to my new marina.

An estimate 1200 lbs of sea-life came off my boat that week from everyone concerned from the time we first saw it till it was cleaned off 3 hours after it was up in the hard. :oops:

This is what it looked like after the scrapage.
(Double Click to Enlarge)
Image

Yes a face shield would have been in order but I was to embarrassed to go buy one and in a hurry to get it cleaned off. :roll:

So yes keep your bottoms clean and painted with the best anti fouling paint money can buy once you've sanded your bottom smooth and your barnacle free. :lol:

Thanks
Alan
It's a good life on the
Honu, 1976 C-22
My Chrysler Sailing Photos: http://s1297.beta.photobucket.com/user/ ... ry/Sailing
User avatar
CaptainScott
Site Admin
Site Admin
Posts: 3112
Joined: Wed Sep 24, 2008 10:46 am
Location: Washington State
Contact:

Post by CaptainScott »

Sanding and scraping bottoms you ask?

You seriously need some good respirator gear and clean filters capable of filtering the fine dust from the paint. Here is a shot of me.

look closely at my face and imagine that dust in my lungs.
Now imagine how you sand your boat.

Just think long and hard!!

:)

Image


Scott
User avatar
Banshi
Posts: 689
Joined: Wed Jul 04, 2007 10:10 am
Location: Jacksonville, FL
Contact:

Post by Banshi »

And of course it could always be worse.........................

Image

:shock:
User avatar
Bhacurly
Posts: 754
Joined: Tue Nov 08, 2005 10:06 am
Location: Spokane WA

Post by Bhacurly »

Geeze Banshi,, that's just gross! Glad I ate already and that I sail on a coldwater lake,,, we get a little slime that comes off at the carwash when we pull her our in the early Fall...
User avatar
Bhacurly
Posts: 754
Joined: Tue Nov 08, 2005 10:06 am
Location: Spokane WA

Post by Bhacurly »

Just in time for you, a full face mask/respirator sale:

http://www.jamestowndistributors.com/us ... mail010411
User avatar
LeatherneckPA
Posts: 298
Joined: Tue May 11, 2010 6:45 am
Location: Williamsport, PA

Post by LeatherneckPA »

That IS a good price. I'm seeing them average over $30 more online.
Iron Mike - Semper Fidelis
Jack of all trades, Master of none
1978 C-22: Believer
User avatar
mcrandall
Posts: 658
Joined: Sat Nov 27, 2010 9:35 am
Location: Muskegon, MI
Contact:

Post by mcrandall »

I was doing some checking on this the other day. Here's a good price: http://www.allergybegone.com/3mfulfac68 ... map=3m6800
Mark
http://s1213.photobucket.com/albums/cc4 ... ew%20C-22/
1975 C-22 currently named Stardust (soon to be "Angela Marie")
User avatar
Alanhod
Posts: 1478
Joined: Fri May 16, 2008 4:30 pm
Location: Washington State
Contact:

Post by Alanhod »

It's a good life on the
Honu, 1976 C-22
My Chrysler Sailing Photos: http://s1297.beta.photobucket.com/user/ ... ry/Sailing
Post Reply