Jib rigging

Here you can discuss Chrysler Sailing across all makes of Chrysler sailboats.
Post Reply
Fred Plantz
Posts: 1
Joined: Wed Aug 01, 2012 5:04 pm
Location: Indianapolis, IN

Jib rigging

Post by Fred Plantz »

Last October we purchased our 1978 Chrysler 20 Sailboat. The sails, main and jib, we assume are not the original sails. Our question is; shouldn't the jib be attached to the fore stay? Our jib has no grouments or ties for attaching the leading edge of the jib to the forstay. Of course the jib has a cable sown in its leading edge from the bow to the top of the mast. Please respond if you know and/or have suggestions.

Secondly, the holding area at the stern of our boat, has a plug in the bottom of it to drain this hold area. What tool is used to loosen/remove this plug? To date we have been bailing and mopping out this area. What is the answer to removing this drain plug?Smooth sailing,

Fred Plantz
User avatar
Padiunka
Posts: 91
Joined: Tue May 15, 2012 3:33 am
Location: Green Bay, Wi

Post by Padiunka »

A picture of your head sail would be helpful, but it is possible that it is used with a roller furler/reefer.
1964 Buccaneer 18 ~ Bijou

1979 Chrysler 27 ~ Andante
Post Reply