galley all cleaned up and redone....

Post your inside the boat topics here
Post Reply
User avatar
Kevin Dreher
Posts: 116
Joined: Tue Dec 14, 2010 9:07 pm
Location: minnesota

galley all cleaned up and redone....

Post by Kevin Dreher »

Image
get n lost
User avatar
Kevin Dreher
Posts: 116
Joined: Tue Dec 14, 2010 9:07 pm
Location: minnesota

another shot...

Post by Kevin Dreher »

Image

cleaned up the old stove, still some pitting but not bad at all and it works great. sink was cleaned up as well still need to get new plumbing for it. and the wood was cleaned up, sanded, stained, and sealed. dad did a great job with this one.
get n lost
User avatar
J. Austin
Site Admin
Site Admin
Posts: 351
Joined: Sun Sep 20, 2009 4:46 pm
Location: Brooklyn, MI

Post by J. Austin »

Great Job!
"The pessimist complains about the wind; the optimist expects it to change; the realist adjusts the sails." - William Arthur Ward
jerecaustin.com
User avatar
Kevin Dreher
Posts: 116
Joined: Tue Dec 14, 2010 9:07 pm
Location: minnesota

Post by Kevin Dreher »

thanks
get n lost
User avatar
astrorad
Posts: 730
Joined: Fri Feb 19, 2010 8:09 pm
Location: s.e Wisconsin

Post by astrorad »

Sure looks better than the OEM galley.
Bill
Rivercruiser
Site Admin
Site Admin
Posts: 146
Joined: Sat Oct 02, 2010 3:06 am
Location: Norfolk

Post by Rivercruiser »

:) Nice work! :)
C-26
Hunter 29.5
User avatar
Capt. Bondo
Site Admin
Site Admin
Posts: 713
Joined: Thu Aug 20, 2009 8:08 am
Location: Hudson, WI

Post by Capt. Bondo »

Nice looking Galley.
Where is the LP for the stove stored?
H:)ppy Place
78 Chrysler 22

You can go to a Zen Master or you can go Sailing, either way you end up in about the same place..... a Happy Place
User avatar
Kevin Dreher
Posts: 116
Joined: Tue Dec 14, 2010 9:07 pm
Location: minnesota

Post by Kevin Dreher »

thanks, the galley turned out really good. the propane tank is stored in the gas tank locker. there is a metal bracket for the propane tank to mount to. the hose has a small whole it runs through to the galley.
get n lost
User avatar
Kevin Dreher
Posts: 116
Joined: Tue Dec 14, 2010 9:07 pm
Location: minnesota

Post by Kevin Dreher »

Image

Image

dad made a cutting board for the sink. nice walnut board. he did a nice job
get n lost
Rivercruiser
Site Admin
Site Admin
Posts: 146
Joined: Sat Oct 02, 2010 3:06 am
Location: Norfolk

Post by Rivercruiser »

:) Looks great! :)
C-26
Hunter 29.5
User avatar
Kevin Dreher
Posts: 116
Joined: Tue Dec 14, 2010 9:07 pm
Location: minnesota

Post by Kevin Dreher »

thanks, know its just get it back into the boat. and finish getting it ready to sail.
get n lost
Post Reply