Original Rigging Specs C26

Post All Rigging Topics Here
Post Reply
User avatar
EmergencyExit
Site Admin
Site Admin
Posts: 2956
Joined: Wed Dec 10, 2003 5:02 pm
Location: Mississippi Gulf Coast

Original Rigging Specs C26

Post by EmergencyExit »

From Windward's site @
http://chryslersailing.lizards.net/chrysler_manual.html



The rigging box (816750) includes:

a. Two 3/16" wire shrouds complete with turnbuckles and plastic rollers. (316650)
b. Two 3/16" wire forward lower shrouds complete with turnbuckles. (316651)
c. Two 5/32" wire aft lower shrouds complete with turnbuckles. (816652)
d. One 5/32" wire backstay complete with turnbuckles. (816653)
e. One 3/16" wire forestay complete with turnbuckles. (816649)
f. Two 5/32" backstay bridles. (816654)
g. Two 1/8" flexible wire halyards complete with shackles. (816694).
h. Two spreader tubes complete with seizing wires. (816689).
i. Three 35' x 3/8" dacron (one mainsheet and two jib sheets). (829930)
j. Two 29'6" x 5/16" dacron (main and jib halyard "tails"). (829880)
N41EF
Posts: 187
Joined: Wed Sep 14, 2011 3:48 pm
Location: Aiken, SC

Post by N41EF »

I just replaced bpth Halyards. I know it says the Halyards are 35 foot of 3/8 but Mine were much longer. I replaced the fwd with 60 feet and my original was about 65 feet. I went longer on the main, about 85 feet to allow it to be used to reach the bow when I raise the mast.
1979 C22 S/V Client Meeting
Post Reply